Ti-Pipe-01
Standards | ASTM B338, ASTM B337, ASTM B861 |
Processing: | Hot forging, Hot rolling, Hot extrusion, Cold rolling, Cold drawing |
Surface: | Bright, Polished, Pickling, Acid cleaning |
Technic Test: | Tensile test, Visual, Ultrasonic, Macrostructure, Microstructure |
Application: | Heat exchangers, boilers, condensers, Heat exchangers, boilers, condensers |
Standards | ASTM B338, ASTM B337, ASTM B861 |
Processing: | Hot forging, Hot rolling, Hot extrusion, Cold rolling, Cold drawing |
Surface: | Bright, Polished, Pickling, Acid cleaning |
Technic Test: | Tensile test, Visual, Ultrasonic, Macrostructure, Microstructure |
Application: | Heat exchangers, boilers, condensers, Heat exchangers, boilers, condensers |
| Fe | C | N | H | O | Al | V | Pd | Sn | Ti |
GR1 | 0.2 | 0.08 | 0.03 | 0.015 | 0.18 | -- | -- | -- | -- | Remainder |
GR2 | 0.3 | 0.08 | 0.03 | 0.015 | 0.25 | -- | -- | -- | -- | Remainder |
GR3 | 0.3 | 0.08 | 0.05 | 0.015 | 0.35 | -- | -- | -- | -- | Remainder |
GR4 | 0.5 | 0.08 | 0.05 | 0.015 | 0.4 | -- | -- | -- | -- | Remainder |
GR5 | 0.4 | 0.08 | 0.05 | 0.015 | 0.2 | 5.5-6.75 | 3.5-4.5 | -- | -- | Remainder |
GR6 | 0.5 | 0.08 | 0.03 | 0.015 | 0.2 | 4.0-6.0 | -- | -- | 2.0-3.0 | Remainder |
GR7 | 0.3 | 0.08 | 0.03 | 0.015 | 0.25 | -- | -- | 0.12-0.25 | -- | Remainder |
GR9 | 0.25 | 0.08 | 0.03 | 0.015 | 0.15 | 2.5~3.3 | 2.0~3.0 | -- | -- | Remainder |
Gr11 | 0.2 | 0.08 | 0.03 | 0.015 | 0.18 | -- | -- | 0.12-0.25 | -- | Remainder |
GR12 | 0.3 | 0.08 | 0.03 | 0.015 | 0.25 | -- | -- | -- | -- | |
| Fe | C | N | H | O | Al | V | Pd | Sn | Ti |
GR1 | 0.2 | 0.08 | 0.03 | 0.015 | 0.18 | -- | -- | -- | -- | Remainder |
GR2 | 0.3 | 0.08 | 0.03 | 0.015 | 0.25 | -- | -- | -- | -- | Remainder |
GR3 | 0.3 | 0.08 | 0.05 | 0.015 | 0.35 | -- | -- | -- | -- | Remainder |
GR4 | 0.5 | 0.08 | 0.05 | 0.015 | 0.4 | -- | -- | -- | -- | Remainder |
GR5 | 0.4 | 0.08 | 0.05 | 0.015 | 0.2 | 5.5-6.75 | 3.5-4.5 | -- | -- | Remainder |
GR6 | 0.5 | 0.08 | 0.03 | 0.015 | 0.2 | 4.0-6.0 | -- | -- | 2.0-3.0 | Remainder |
GR7 | 0.3 | 0.08 | 0.03 | 0.015 | 0.25 | -- | -- | 0.12-0.25 | -- | Remainder |
GR9 | 0.25 | 0.08 | 0.03 | 0.015 | 0.15 | 2.5~3.3 | 2.0~3.0 | -- | -- | Remainder |
Gr11 | 0.2 | 0.08 | 0.03 | 0.015 | 0.18 | -- | -- | 0.12-0.25 | -- | Remainder |
GR12 | 0.3 | 0.08 | 0.03 | 0.015 | 0.25 | -- | -- | -- | -- | |
Grade | Tensile strength | Yeild strength | Elongation | Area of Reduction | ||
MPa | kis | MPa | ksi Mpa | % | ||
Gr1 | 240 | 35 | 170 | 25 | 24 | 30 |
Gr2 | 345 | 50 | 275 | 40 | 20 | 30 |
Gr3 | 450 | 65 | 380 | 55 | 18 | 30 |
Gr4 | 550 | 80 | 483 | 70 | 15 | 25 |
Gr5 | 895 | 130 | 828 | 120 | 10 | 25 |
Gr6 | 828 | 120 | 183 | 115 | 15 | 25 |
Gr7 | 345 | 50 | 275 | 40 | 20 | 30 |
Gr9 | 620 | 90 | 483 | 70 | 15 | 25 |
Gr11 | 240 | 35 | 170 | 25 | 24 | 30 |
Gr12 | 483 | 70 | 345 | 50 | 18 | 25 |
Grade | Tensile strength | Yeild strength | Elongation | Area of Reduction | ||
MPa | kis | MPa | ksi Mpa | % | ||
Gr1 | 240 | 35 | 170 | 25 | 24 | 30 |
Gr2 | 345 | 50 | 275 | 40 | 20 | 30 |
Gr3 | 450 | 65 | 380 | 55 | 18 | 30 |
Gr4 | 550 | 80 | 483 | 70 | 15 | 25 |
Gr5 | 895 | 130 | 828 | 120 | 10 | 25 |
Gr6 | 828 | 120 | 183 | 115 | 15 | 25 |
Gr7 | 345 | 50 | 275 | 40 | 20 | 30 |
Gr9 | 620 | 90 | 483 | 70 | 15 | 25 |
Gr11 | 240 | 35 | 170 | 25 | 24 | 30 |
Gr12 | 483 | 70 | 345 | 50 | 18 | 25 |